ModuleMaster | 2007 Testimonials

December 15, 2007

To the wonderful folks over at ModuleMasters,

I wanted to take some time and thank you for all the hard diagnostic work that you performed on my ABS module. Every time that I would call your staff was courteous and very prompt with answers. It was truly a pleasure doing business with you, and rest assured that I have and will continue to recommend your services to others in need of your skills. Although my ABS module proved to be beyond repair, you proved to be a company of your word and quickly refunded the amount that I had tendered to you. I hope that others who are considering your service realize that they have nothing to lose and everything to gain by doing business with you.

Thanks again,

-Robert G.
Hanover, Maryland

November 10, 2007

Mr. Curtis,

Just put in the rebuilt unit from your company. Worked great! You have a very satisifed customer here. I will recommend you to anyone I come across with module problems. It was a pleasure dealing with a company that does what they promise.

Thanks for a job well done!

-Don B.
Fairborn, OH
Cadillac Catera

November 5, 2007

Gavin-

An update regarding your overhaul of my 2001 Volvo V70 ABS module: Very neat and professional repair with quick turnaround and written warrantee. All console warning indications cleared when module was re-installed. ABS, Stability Traction Control, and Winter Mode and all have continued to work flawlessly for 10 months. A great job at a great price!

Thanks!

-Alan F.
Glastonbury, CT
(Volvo Ate)

November 4, 2007

Finally got my control unit back in my rolling box and it works perfectly! Thanks for the quick turnaround and quality work! If any other control units fail in my Volvo circle I'll be referring them to you.

-Patti H.
Tulsa, OK
(Volvo Ate)

November 4, 2007

Gavin,

Gavin, Excellent work!! I sent the module to you on a Friday and it came back on the following Thursday. Put it in within 30 minutes of receiving it and both of the brake warning lamps went out. Very pleased with your service and I will be recommending you to anyone that I know of who has the same problem.

Thanks again,

-Justin H.
Sun Prairie, Wisconson
(KH EBCM)

November 02, 2007

Gavin,

I installed the rebuilt ABS module on my SUV and it works perfectly. The instructions to re-install the unit were a great help. The ABS, parking and traction control lights went off. You have saved me over $1200.00 from the dealership and other repair shops. Thank you so much for providing this wonderful service.

-Cedric C.
Memphis,Tennessee
(KH EBCM)

November 1, 2007

Oh.......My.....God! I mean YOU did it....but still I DID IT! I am TOTALLY NOT a mechanic and did most of the work with kitchen utensils! Ok maybe not kitchen utensils, but I used NO socket wrench. Just a T20 bit from my interchangeable screwdriver set and a manual 1/4-inch wrench to turn the T20 bit! The module works. The car works. It's like a new car!

I don't know if you take work from small auto shops, but I shared your website with 2 of them on my street.

I was especially happy to share the info with this guy who was gonna CHANGE MY OIL FILTER to try to make the oil light go out at least!!!! He tried to tell me there must be some sensor in the VW oil filter and it knows when you've changed the oil but NOT the oil filter! I believed him...unitl I found YOU!!!!

I sent a tip via PayPal to : (email removed) $50 smackers, baby! You soooooo deserve it!

Little Debbie the housewife from Chicago,

-Deborah K.
Chicago, IL
(Bosch 5.3)

October 28, 2007

The people at Module Master were very professional and competent in handling the repair for my 1998 Dakota. At first my module was repaired, but some solder traces came undone in shipping back to me that had new fault codes. After sending the unit back to Gavin for warrantee, he investigated the module and using a microscope found that the board was so thin that some chips had broken off in transit. He re-soldered the module and packed it carefully for return shipment. It’s running fine now and has saved me a large amount of money and hassle from having to purchase new. Many thanks to the Module Master team and the tenacity of the owner.

-Mark A.
Spokane, Washington
(Dodge KH EBCM)

October 23, 2007

Gavin,

It is very refreshing to deal with people who do exactly what they say they are going to do and that is you and your staff. I received my module yesterday and installed it yesterday evening. No lights and no bells, just a perfectly functioning ABS system on my wife’s car. She’s as pleased as I am. I have posted my progress and great results to www.audiforums.com. I also understand there are a number of Audis driving around the DFW metroplex with an identical problem to the one I had and you fixed quickly and economically. They’ll hear about this from me.

Total cost to me was $267.50 (includes repair and postage both ways) and about 3 hours of my time (I’m methodical) for a job that had been estimated for me to cost about $1300 for the module replacement or $2300 for the module and pump replacement.

I’ve always thought it wasteful to remove and replace expensive electronic parts when I just knew that many of these parts could be removed, repaired and reinstalled at a great savings in money and resources. Now that I’ve found you I know it is true. Thank you for what you are doing.

Sincerely,

-Bob K.
Fort Worth, Texas
(Bosch 5.3 133)

October 19, 2007

Gavin,

I just received my rebuilt module yesterday and installed it today, works great. Thank you for the fast service and very good deal ($800 dollars from dealership).

Thanks again

-Steve C.
Franklin, Kentucky
(KH-D2 EBCM)

October 14, 2007

Thanks, Gavin, you are 2 for 2, and have saved me well over $1000!!!!!

2001 GMC Yukon
1996 Volvo 850

-Mike R.
Peachtree City, Georgia
(Volvo Ate and KH EBCM)

October 14, 2007

Hi Phil,

We received the repaired module earlier this week and built it in our car yesterday ….. the ABS is working again!!!! Thank you very much for the repair and perfect service we have received from Module Master. Your website is also very clear with the removal instructions.

If I ever hear about more people with a similar problem, I will recommend your service. Hopefully before they contact a Volkswagen dealer. Our dealer spent 3.5 hours without any result, they told me to continue the next morning. That evening I searched the internet and found your site within the hour. It has saved me a lot of money.

Thanks again,

-Iris V.E.
Netherlands
(Bosch 5.3 283)

October 10, 2007

Gavin,

Thank you for the rebuild of my ABS module, it corrected all my ABS and brake codes! Your staff did an excellent job on working with me to get the module returned on a timely basis as promised. Please extend my gratitude to Elaine and your capable staff for a job well done. (Tell Elaine the Utah deer hunt was successful) My preferred auto shop was going to charge in excess of $1600.00 to repair/replace the module and modulator. They are interested in your services to save their customers money; I have referred your services to (them).

Thanks again.

-Kevin V.
South Jordan, Utah
(KH EBCM)

October 10, 2007

Gavin,

Thank you for your prompt turnaround and repair of the climate control unit for my 1996 BMW. Turnaround time was great, communication with your staff was excellent and the unit is working perfectly. And always nice to save $$.

Thanks again,

-Barry D.
Lake Oswego, Oregon
(BMW Climate Control)

October 01, 2007

Dear Circuit Solutions,

Dear Circuit Solutions, I am happy to report your rebuild of my ABS module corrected all my failure codes! You did an axcellent job and returned the unit on a timely basis as promised. Please extend my gratitude to your capable staff for a job well done. I avoided a huge repair bill from my "friendly dealer repair department", they wanted in excess of $1300 to replace the whole unit. Again, thank you very much.

-Jim C.
Franklin Park, Illinois
(Bosch 5.3)

PS: your detailed removal and install instruction were excellently done and came in handy - made it very easy especially on something you're not used to working on.

September 28, 2007

Gavin, you are the best. My Volvo 850 GLT ABS rebuild works great.

-Arnaud M.
San Diego, CA
(Volvo Ate)

September 25, 2007

Dear Gavin,

Our ABS system went crazy, the ABS light came on and the pump kept running even after the engine was turned off. It is Saturday night so no auto shops are open. I surfed the net for at least 45 minutes with no results to our predicament. I was about to give up when I found your website. You saved my truck. I read your immediate solution and walked my husband through it to perfection!!

Thank you so much,

-Julie S.
Dallas, TX
(KH EBCM)

September 24, 2007

Dear Gavin,

I would like to thank you so very much for starting this great company that has save us a lot of bucks. I looked for a used module everywhere but was not able to find one anywhere. I was determine not to pay the $1000 I was quoted at my local dealer, so I went to the internet and found the info I needed to fix the problem myself. Your site was very helpful and I was able to remove the part and send it to your company to have it repaired. I was amazed that the part was repaired very professionally and returned promptly. I was able to reinstalled it and the abs module worked great. I was so impressed that I mentioned the story at our local car club meeting and every one wanted your web site address.

Again Thanks,

-Alfredo R.
Midland, Texas
(KH EBCM)

September 17, 2007

Gavin,

Received the assembly on Friday, installed on Saturday, and everything works great. I highly recommend your service, and appreciate the communication, and quick return. I am also convinced that my brake lines had some air in them from the factory, as bleeding them certainly has improved the pedal firmness.

Thanks again,

-Bill G.
Pendleton, Indiana
(KH EBCM)

September 16, 2007

You guys rock!

About a month and a half ago, I was driving happily along in my 2000 Audi A6, and all of the sudden, a bunch of my engine warning lights went wacko! I had to pull out my owner’s manual and make a note of which lights were going on so I wouldn’t forget when I call my mechanic.

At first, it was the just the ABS, brake, and oil pressure lights and warning chimes. I kept driving the car because I knew it had to be some computer malfunction that was causing all hell to break loose. Anyhow, I took the car to my independent mechanic and he couldn’t find anything wrong, but suspected the problem had something to do with the “control panel computer”, a $1,000 part from Audi + installation. Well…… with more complicated repairs, I always take my Audi to the dealership, figuring that they are more qualified to diagnose and repair. By the time I could get to the dealership, my warning lights were going wacko on a regular basis. In addition to the ABS, brake and oil, the tach would drop to zero and the AC would shut off (not a good thing in Arizona in August) After a week and $1,200 later at the Audi dealership, I had new engine mounts, an oil leak repaired, and some “short in the dashboard” repaired. As soon as I started my car when I picked it up, the lights went all wacko again. The problem had not been fixed. I left my car there and kept the loaner.

A week later, my service advisor called and said I needed a new ABS module. I ask how much it would cost and he said it was a $900 part from Audi. I said “hell no” and asked what my options were. He said I should look for a rebuilt module on the internet, which would be about $500. Long story short, a Sunday afternoon of searching led me to your site (actually connected through an Audi chat site). Your $200 and Audi’s $200 install later, my car is fixed! I picked it up yesterday and am very happy!

I took a printout of your site to the Audi dealership and will be taking one to my independent mechanic. I think your service will help them keep their customers happy and loyal Audi owners.

Thank you!

-Tricia V.
Phoenix, Arizona
(Bosch 5.3)

August 23, 2007

Gavin,

I just want to inform you I got the module this morning. I have now mounted it and all works properly. I will also recommend you on the Swedish AUDI-forum and add some hints to speed up the postal service when its send to you. Now it was delayed by the Swedish PO on account of missing custom information?s.

Best Regards,

-Kalle Ostlund
Borlänge, Sweden

August 16, 2007

Gavin,

THANK YOU for your prompt turn-around time. I sent you the ABS Module for my 99 S80 Volvo and received the repaired part in less than a week. My local Volvo dealership told me the cost to replace my failed ABS module would be $1115.00!!! I paid one tenth the cost by using your services. Removing and replacing the module was a very straight-forward process and I am confident that anyone with the proper tools and a tiny bit of patience can do this repair work themselves. Initially all warning lights remained on when I replaced the module and continued to remain on after a 5 mile test drive. Once I disconnected the battery (for about 1 hour) and reconnected, all the lights turned off - including the Check Engine Light. Believe me. If I have a chance to recommend your services, I will do so WITHOUT HESITATION. If anyone ever asks for a reference, put my name on the list! Shame on these dealerships for the prices they charge.

Regards and thanks,

-Bob K. - a VERY happy customer
Overland Park, Kansas
(Volvo Ate)

August 12, 2007

Gavin,

I saw the info on the packing slip, installed it last night, no annoying abs light and beeps any more.

thanks

-Mike G.
Roanoke, Virginia
(Bosch 5.3 284)

August 10, 2007

Mr. Curtis,

This is just a little note to say thank you for your work. The experience I had with your company, from start to finish, was extremely professional. I received my ABS module back in the amount of time you said. The instructions on your website for replacement of the module were very clear. I was impressed how you included your repair actions on the receipt, some repair places just write “repaired unit” or something like that. After I reinstalled the module in my car, all the problems with the annoying beeping and the abs lights were history. I’ve had the module in my car for about a month now, and have no problems whatsoever. I will surely recommend your company to anyone I can. The money you saved me wasn’t bad either! Thanks again for the top-notch service!!

Sincerely,

-Craig L.
Bonaire, GA
(Bosch 5.3 285)

August 8, 2007

Hi Gavin,

Received the unit, install and all is well! Thanks for your help and professionalism! I appreciate the effort both you and Phil put into this to solve my trouble. Great price as well.

All the best

-Paul D.
Halifax, NS (Canada)
(ABS unit from a Nissan Frontier 2wd)

August 8, 2007

Gavin,

Good morning, I wanted thank you for your quality product and service – I installed the module last night, thanks to your video on the website the installation could not have gone smoother. All the lights and buzzers are off and the ABS seems to work perfectly. It is a pleasure in today’s disposable society to find someone that can actually fix something electronic and provide value along the way. GREAT WORK – keep it up. Maybe I should send you the pile of broken VCR’s I have been saving for the last 25 years that I can’t bear to throw out….I just know someone can fix them!!!! The core will go out in today’s mail.

Best wishes and thanks again for a great product.

-Andrew P.
Ridgefield, Connecticut
(Bosch 5.3 284 purchased from inventory)

July 31, 2007

Hi there!

My ABS module arrived yesterday and is now back in the car functional "as new", No control lamps or fault codes. Thank you for an excellent and fast job and I'll recommend you at the very best for all who need help. Have a nice day.

Best regards,

-Torsten

July 23, 2007

Gavin,

Hi there! My ABS module arrived yesterday and is now back in the car functional "as new", No control lamps or fault codes. Thank you for an excellent and fast job and I'll recommend you at the very best for all who need help. Have a nice day.

Best regards

-Torsten N.
Jarfalla, Sweden
(BMW 5.7 950-002 with DSC)

July 23, 2007

Gavin,

I just wanted to thank you again for the rebuild you did on my EBCM for my 2001 chevy tahoe I received it last monday, put it back in, and it worked perfectly!! Been driving it all week and no problems at all!! I was worried when i saw my abs and brake light come on. After a stop at the dealer and them saying it could be the EBCM, and it was around $1000, i could not believe it. I found your site and have never been happier. All fixed, and for a lot less!! Feel free to use my comments or direct anyone with any hesitation to me and ill tell them how good it is.

Thanks again,

-Art C.
Phoenix, AZ
(KH EBCM)

July 18, 2007

Gavin,

I really appreciate your honesty and integrity. The next day we tried two more ABS units, neither worked, a rebuilt one and a new one and the car was to be delivered in about an hour when the mechanic finally took the l/f (left front) wheel off. "name removed" is usually very thorough with their service and no one seems to know how they missed this but the axle nearly fell right out! After securing the axle everything worked properly so here is your check back and I will be sending you my next bad unit.

Thanks again,

-Jim L.
Devon, Pennslyvania
(Volvo - We refunded rebuild cost ($110), all of their shipping ($52), and added $8 to have the bad unit sent back to us after we spent a lot of time troubleshooting the module. Turns out the module was fine ... but the car was not.)

July 13, 2007

Hello Gavin, I would like to say thank you. You received my module on a Monday and I had it back by Friday. I installed it and it works fine. I am grateful for the money you saved me. What I paid would not have covered half the labor bill, not to mention 800 dollars plus for a new part.

Thanks Again,

-James C.
South Amboy, New Jersey
(2003 Chevrolet Avalanche KH EBCM with running pump motor)

July 13, 2007

Gavin-

Thanks for the repair and quick turnaround of the EBCM Module for my 02 Avalanche. I installed it immediately and followed the instructions provided. It was a snap. The local dealership here of course wanted to Remove & Replace the EBCM at a cost to me of $800 + 3.5 hours of labor. Total cost to me out the door would have been $1250. The $150 spent with you to repair the module and the 1.0 hour of labor I put in to Remove and Refurb the module was well worth it. You saved me nearly $1000. Had I just sent you the module in the first place, as I was originally inclined to, I would have saved myself the $85 Tech2 diagnostic charge as well. I can’t thank you enough.

Best Regards,

-Donny S.
Gilbert, AZ
(KH EBCM)

July 11, 2007

Success! I had managed to put the 60 amp fuse in the wrong slote. Correcting that removed one light on the dash, and I also missed the third connector to the module. So all is well now. Thanks for the great job.

-Les S.
New Castle, Colorado
(KH EBCM)

July 3, 2007

Gavin,

Just a quick note to let you know the repair fixed the problem. This solution is almost too good to be true. Our 2001 Yukon is back on the road with no ABS or Brake light issues. I will be blabbing about this repair on all of the groups I belong to on the internet.

Thanks again!

-Robert Q.
Midland, Texas
(KH EBCM)

June 29, 2007

WOW! It arrived today and I have installed it and it works great. It was a real pleasure doing business with you and I am passing the info around to everyone I know. I am a bit of a car nut so they listen.

All the best for the future.

-Randy I.
Calgary Alberta, Canada
(KH EBCM)

June 27, 2007

Hi Phil, Gavin and Connie:

The ABS controller arrived safely and was fitted today and works perfectly!! Whew! Thanks guys. I'll be returning my one ASAP for the $75 rebate. Thanks again for your awesome service and professionalism.

Regards

-Mike L. Little 'ole New Zealand - Go the Kiwis - bring back the America's Cup to NZ!!!
Auckland, New Zealand
(Bosch 5.3 135 purchased from inventory)

June 27, 2007

Gavin,

Thanks for your service, easy to follow instructions, reasonable cost, and saving a bunch of headaches. I was a little skeptical at first, but now that the part is installed and everything seems to be working well, I'm sold now.

-Mark M.
North Bend, Washington
(Bosch 5.3 284)

June 24, 2007

Gavin,

I re-installed the rebuilt ABS module from my 2000 Saab 9-5 and after 200 miles of testing, it works. The warning lights on my instrument panel were lit up like the Las Vegas Strip, but now all the lights are out. Saab dealers wanted $3000 to replace the entire ABS unit (electronics and mechanical), but I am happy to have found your service. I will do my part to spread the word about you.

Thanks.

-John B.
Oakland, CA
(Bosch 5.3 451)

June 21, 2007

Gavin,

Thanks for standing by your work and for such a quick turnaround!

Best regards,

-Jared N.
Salt Lake City, Utah
(Bosch 5.3 in for warranty - Gavin figured out how to rebuild ALL modules with services listed on this website and EBAY on his own, he did not copy anybody else... this particular module was rebuilt at the beginning when Gavin was still perfecting the rebuild technique for the Bosch 5.3.)

June 19, 2007

JUST WANT TO SAY THANK YOU FOR REPAIRING MY EBCM. ALL LIGHTS HAVE CLEARED, AND THE ABS IS WORKING LIKE THEY SHOULD.

THANKS AGAIN,

-RUSS H.
Amelia, Ohio
(KH EBCM)

June 8, 2007

Hello Gavin,

The new one was installed by me on Monday and the ABS lamp went off straight away. Went into my BMW dealer to have it coded to my car and after that the DSC lamp went off too, so I'm a happy camper:-) I'll probably go back to the US in two weeks so I was thinking I'd bring the faulty unit with me then and send it over to you if that's okay? I'd like to express my gratitude for the excellent service you have provided me with and rest assured I'll recommend your firm whenever I hear someone having a problem with their module.

Cheers,

-Magnus F.
Sweden
(BMW 5.7 950-002 with DSC, the original module sent in to us for rebuilding. Turned out to be a bad unit so we rebuilt one from our inventory and sent it back as a replacement ... it worked!)

June 5, 2007

Gavin-

Just a tip that you likely are already familiar with... I recently installed an ABS module for my 2000 Chevy P/U and of course the Torx head screws stripped out while attempting to remove them from the aluminum housing. After removing the entire ABS pump assembly, I used a drill bit (larger than the diameter of the screw thread, think it was a 5/32" dia) to drill thru the head of the four screws using what was left of the mangled T-20 torx hole as a guide. Once the drill bit breaks through the head of the screw, the shank of the screw can then easily be unscrewed from the housing. Worked very well and didn't need to worry about grinder marks left in the plastic housing/brass compression limiter sleeves (which I see you deduct for when crediting for the core).

FYI - The module is working perfectly and I appreciate the work that your company is doing. Laura was a big help! She helped to expedite the rebuild of a the module that I needed so that I received it in time for my weekend-warrior project! Please pass this along and thanks again!

Regards,

-Chris L.
Stillwater, Oklahoma
(KH EBCM purchased from inventory)

May 30, 2007

Gavin:

I wanted to thank you guys for fixing my VW Passat Module so quickly and so well! I put it back in the car yesterday, and the annoying alarm stopped, the ABS brake light stopped flashing and the car performs great. Many thanks! I will definitely recommend you guys to anyone who asks.

-David B.
Manassas, Virginia
(Bosch 5.3 283)

May 29, 2007

Hi Gavin, I appreciate the work you guys did for me! The module works perfectly. You guys saved me over $1,000. I am very impressed. You did exactly what you said you would do, exactly when you said you would do it and at a reasonable cost. Unfortunately, the torx bolts on my module had been previously stripped out, so I had to disconnect the brake lines and remove the pump body in order to remove the EBCM. When I bled the brakes, the brake fluid was extremely dirty! I was very surprised. So I guess it was good that I had to remove the brake lines after all.

I have one small suggestion on your instructions. You mention greasing the electrical connections in the same paragraph as reattaching the module to the pump body. It made me think you wanted me to grease the towers on the pump body that go up into the EBCM. I don’t know what would happen if you put grease inside the module (?). Anyway, you might want to move the part about greasing the electrical connections to a paragraph after the instructions to clean and reassemble the module to the pump body.

Thanks,

-Rusty C
Garner, North Carolina
(KH EBCM)

May 23, 2007

Dear Gavin and collegues,

Thanks a lot for the fast and succesfull repair of my Bosch 5.3 ABS module. Well done !! 5 years guarantee is great - I will recommend you.

Best Regards

-Christof P.
Switzerland
(Bosch 5.3 283)

May 17, 2007

Gavin,

I have recieved the ABS module today May 18 and mounted it on the car SAAB 9-5 and it works perfectly again! Thank you 1000 times! Now I can sleep again in the nights and I have money left to a vacation. Thank you one more time for a great and fast work, it´s been pure pleasure to doing business with you!

-Glenn
Sweden
(Bosch 5.3 451)

May 17, 2007

Gavin:

Thanks for the quick turnaround on the controller module for my '01 Blazer. FEDEX delivered it yesterday afternoon, I installed it, and the ABS light has gone out along with the red brake warning light. I calculate that you saved me close to $800--and that's a bunch!

-Paul C.
Port Angeles, Washington
(KH EBCM)

May 17, 2007

Dear Gavin & Team,

Thanks very much for a very speedy repair of the ABS unit from my BMW. Your communication throughout the process was helpful and rapid, and its great to have my brakes working properly on the car. IN addition the shipping to and from Switzerland seemed to take very little time at all, I highly recommend you to anyone who needs these kind of repairs, many thanks for a job well done. Feel free to put this on the website.

Kind regards,

-Giles C.
Switzerland
(BMW 5.7 900-001 without DSC)

May 15, 2007

Hi,

Thanks so much for rebuilding the abs module for my 1999 528i bmw,I send this module to a two companies with out a result,until a found you looking in the internet and you resolve my problem, thanks,

-TEO
National City, California
(BMW 5.7 900-001 without DSC)

May 13, 2007

Module Master,

I received my 2000 VW Passat rebuilt control module and just as was advertised on time and in a matter of days. When I opened the box it looked in pristine condition (If I did not know it was rebuilt I would think it was new, I liked the smiley face sticker also, nice touch). I installed it today and again as you advertised, "lights out", no blinking ABS light or brake light. I am so delighted with your service that I will tell everyone I know if they come across a bad ABS module in their car.

My VW dealer wanted about 1800.00 dollars to put in a new one. Your detailed removal instructions were right on, but I would add that the front wheel well (drivers side) cover s/b be removed to gain better access to remove the screws that attach the module to the pump. Again thanks so much , I cannot tell you how impressed I am with your service.

Regards,

-Anthony E.
South Setauket, New York
(Bosch 5.3 358)

May 8, 2007

Problem: - cannot keep fault code 81 cleared. -code 41 has been intermittantly on, but stayed clear after last initialization. An attempt by (one of our main competitors) to correct above problem was unsuccessful - they said they cannot repair it. So now we put it in the 'Master's' hands!

-Phil G.
Hartsville, South Carolina
(BMW 5.7 950-001 with DSC - module was 'rebuilt' by one of our main competitors. We rebuilt what they missed and corrected what they did wrong... did a follow-up call one week later and module is doing good!)

May 7, 2007

hey Gavin, just another testament to the great repair on my module, 1998 dodge pickup abs. I also want to say thanks to Connie and Laura for their effort to see that I got my module back in time to use the next day on a 500 mile trip. It's working great.

thanks,

-Fred B.
St. Louis, Missouri
(Dodge KH EBCM)

May 1, 2007

Gavin,

A big thanks to you and your team there. The dealer had quoted me over $1200 to replace the 'faulty ABS module' which to me seemed dramatic and unreasonable. I discovered the ModuleMaster option on AudiWorld and my experience was absolutely fantastic. I removed my module on Sunday using the provided online instructions, sent it over night on Monday, had it back on Friday and in my car on Saturday. All for a price that was more then reasonable. My module is functioning great and I am happy to say that I achieved my goal of 'No blinking dash lights' by 100,000 miles on my Audi A4 (400 miles to go!).

So thanks again and keep up the good work!

-John A.
Half Moon Bay, California
(Bosch 5.3 284)

April 30, 2007

Phil & Gavin:

Thanks! I received the Module, put it in my car, and all seems well. My ABS warning light, my brake warning light, and my Check Engine light are all off now.

Thanks a bunch! Cheers,

-Young L.
Lafayette, California
(BMW 5.7 950-002 with DSC)

April 29, 2007

Gavin,

Last week I ordered an EBCM for my 2001 Suburban and just wanted you to know how pleased I was with the entire transaction. I think your prices are very reasonable, your workmanship superb, and your service outstanding. I also appreciated the succinct and concise manner in which you describe the problem, the repair, and the installation. For once, everything worked according to plan, fit as described, and performed exactly as you said it would. At a time when American industry is taking a beating from abroad, it is gratifying to know that there are still honest craftsmen like yourself still at work.

Thanks again for your help.

-Erwin W.
Memphis, Tennessee
(KH EBCM)

April 25, 2007

Gavin,

Gavin, Just wanted you to know that the unit came back week or so ago and it works perfectly! The $800 you saved me from having this done at my BMW dealer is definitely going to be spent elsewhere...like on gas money now. I'm driving back and forth to work smiling knowing that I did the right thing by working with your team.

Sincerely,

-Bill M.
Gainesville, Georgia
(BMW 5.7 900-001 without DSC)

April 24, 2007

Hi Gavin and the ModuleMaster Staff,

THANKS for the great job you did with my ABS module for my 1999 Volvo S80 T6! I received the module in the mail today and just had my mechanic re-install it and everything works great!! Your staff was great to work with and helped guide me through the entire process....which only took one week from start to finish! You saved me about $1000 from what the dealer wanted to charge for a new ABS module! I will recommend you guys whenever possible.

Thanks,

-Jeff L.
Issaquah, Washington
(Volvo Ate)

April 23, 2007

Gavin,

I posted this on the bimmerfest forum today...

I recently had a problem with my ABS and ASC lights staying lit on my 1999 528i. The problem initially was intermittent. Then the lights stated to stay on permanently. After awhile the speedometer became intermittent. I read on this forum that others had the same problem and contacted a company called Module Master for help. I contacted them and asked the owner Gavin Curtis if the problem could be one of the wheel speed sensors. He told me that they could be the culprit and he gave me information as to how to swap them. It eventually turned out to be a bad abs module. I sent my module in and within 5 days I had it back and installed. It Works Great! $306 with shipping...Thanks! for the all your help.

-Brian M.
(BMW 5.7)

April 4, 2007

Phil,

Thanks for the great work, saved me a bundle, prompt and courteous service. Thanks Again,

-Jesse E.
(Bosch 5.3 134)

April 2, 2007

To the wonderful folks over at ModuleMasters,

Thanks again,

-Rob G.
(BMW 5.7)

March 30, 2007

Hi again,

Just installed the LCD kit (for Audi Climate Control) and it works perfect. Looks very nice with a very detailed manual. Thank you for excellent service. Awesome :)

Regards,

-Bart

March 27, 2007

Gavin,

Enclosed is the nonfunctional core that was removed from a 2001 Chevy Tahoe. The enclosed part is being sent to you for the core credit value. The truck works very well now, thank you!! As an FYI, I figured out how to find you by looking on the internet after listening to an NPR radio program by the two mechanics out of Boston, "Click and Clack, the Tappet Brothers". They are off the wall at times. The information they provide is not only entertaining, but, as it was in this case, extremely worthwhile. I figure that by using your parts and the mechanic that did the work for me, I saved about $900 over a dealership part and repair. Thanks!!

Sincerely,

-Lenard G.
Simi Valley, California
(Kelsey Hayes "KH")

March 27, 2007

Gavin,

We have used you in the past & I have given your cards & phone number to countless people. If you want, place me in your ads as a testimonial!! Why pay $250 for a mystery quality ABS unit at the salvage yard, when you can get better than new with a rebuild from circuit solutions for $150 bucks !!!!!

KEEP UP THE GOOD WORK!!!!!!

-George E./Pete E.
Chevrolet

March 25, 2007

Gavin,

Just wanted to let you folks know that the shipment arrived and I reinstalled the module this weekend. Can't thank you enough for providing the service, and providing the good customer service as well.

Regards,

-Richard P.
(Bosch 5.3 358)

March 20, 2007

Gavin,

Thanks for the quick turnaround on repairing my A4 module. Problem solved and the ABS light is out. $200 a lot less then Audi's $975 estimate! The car failed a California smog check because the failed module prevented the smog check technician from communicating with the OBD II computer even though tailpipe emissions were OK. Installed repaired module and car passed smog check.

-Lindsay C.
(Bosch 5.3 284)

March 3, 2007

Hey Gavin,

I just wanted to thank you for the quick repair of my Audi ABS module. With the help of your optional 1-day turnaround, I was able to have the module back in my hands only 3 days after I shipped it…and to Canada no less! The unit seems to be working great (no more annoying abs lights or beeping when I start up the car), and you saved me nearly $800 over a new unit.

Thanks again,

-Kyle S.
(Bosch 5.3 284)

February 17, 2007

Gavin,

I just wanted to take a minute to thank you and your staff for an excellent repair job on my suburban. you proved an outstanding service at an excellent price and i will refer anyone i know with this problem to you. once again. thank you

-Shawn R.

February 17, 2007

Gavin,

Every once in a while a company comes along that says what they do and does what they say. The symptoms you described were exactly what my Volvo C70 was experiencing so I sent you my ABS module. In returned you fixed it as advertised and quite quickly thank you and returned it to me. Everything works great now. It's been about 3 weeks and no problems. The dealership wanted over $400 bucks for that part so I saved almost $300 bucks by using you.

Thank you Gavin.

-Mark R.

February 12, 2007

Hello,

I got my module back. I installed it today. YOU PEOPLE ROCK! I don't need to tell you how much money you saved me...

Thank you very much!

-Pete J.

February 10, 2007

Gavin,

Just a short note to thank you. I installed my EBCM today that you recently re-built for me. I followed the detailed instructions you sent me and it worked like clockwork. I can not thank you enough for your service. It was quick and professional. Thank you so much.

Thanks again,

-Jerry B.

February 9, 2007

Greetings,

I was very impressed how quickly you repaired my ABS module and returned it to me. When my ABS, ASC, and check engine lights came on I took my 1999 BMW 528i to an independent garage that specializes in German cars. They said I needed a new ABS module that would cost $1050 and the labor would be an additional $150 for a grand total of $1200. I found out that the ABS module was very easy to get to and also easy to remove and reinstall. I continued to drive the car after I removed the module and covered the hydraulic unit and data connector with a high temp plastic bag (oven bag capable of 400F) and electric tape to protect it from moisture and dust. I received the repaired ABS module 10 days after I shipped it to you using d day shipping for both initial and return shipments. After I installed the module the lights went off and everything has returned to normal. I appreciate the quality work and quick turnaround.

Thank you,

-Larry B.

February 7, 2007

Thank you so much for rebuilding the ABS Module for my 2001 Cadillac Catera. You saved us so much money. God will surely bless you for not ripping people off like the dealerships do. We have had a rough time this past 4 months. We lost our 17 year old daughter in a car accident in October. Then my car started having all these warning lights come on. The dealership wanted @$1500.00 to fix it. I didn't have $1500.00 dollars to put into a car that I will probably not keep much longer. I was desperate to find a better solution and found you company on the internet. We re-installed the module and all the warning lights went off and the speedometer started working again.

I can't tell you how happy we were that it worked. Thank you again.

Sincerely,

-Sandra C.

January 23, 2007

Hi Gavin-

Repaired ABS module arrived yesterday and I got it reinstalled this morning. So far, everything seems to be working just fine!

Thanks very much:

-Scott

January 17, 2007

Gavin,

I wanted to drop you a note thanking you for sticking with and repairing my ABS module even though it is not one of the modules you usually repair. (Large KH EBCM) I installed it in my 1999 Suburban on Friday 1/12/07, following your installations instructions and the ABS worked! My wife says THANK YOU, she is the primary driver of the vehicle and wanted to have the ABS working again. They haven't worked in 9 months.

The $150.00 I paid was much less than the the "Stealer" wanted for a new one. I will spread the word about you to others and my local garage.

Thank you,

-Rich H.
Grand Haven, Michigan

January 16, 2007

Gavin,

I just wanted to thank you for a great job. I had the cursed ABS light on my dash for over 10,000 miles. I was skeptical at first, but after I checked out how long you were in business I sent in my ECBM. I received the repaired module in about one week, the directions were very specific, and the ABS on my truck works like new. I will recommend your service every time.

Thanks again.

-Joseph L.
(1999 Silverado)

January 16, 2007

Hi Gavin,

Thank you very much for your quick and profound answer. I am going to see what I got under my hood and for sure i am going to spread the word about your great customer service.

thank you

-Jan

January 15, 2007

Hey there,

I just wanted to let you know the module finally arrived here in Calgary the other day, and so far, has been working perfectly! Thanks again for your fantastic efforts, and please thank Kylie for me also.

I subscribe regularly to a popular BMW chat room, and you can bet that I will be praising the efforts you, and your staff. I've already passed on your info to several maintenance shops here in Calgary that I deal with. Thank-you again, and I'll keep you posted.

All the best,

-Martin K.

January 12, 2007

Hello,

I just wanted to say that I received my repaired BMW ABS module today and it works perfectly and cleared up my ABS and ASC warning lights. My speedometer also works again. Thank you very much for the good work, the quick turnaround, and the 5-year warranty. This was built by #3, so please thank them for me. I have recommended your work to the members of the Yahoo BMW E39 discussion group.

Best Regards,

-Ed S.
('99 BMW 528iT)